DSS Chevrolet Camaro 2010-2015 V8 6-Speed Manual 3.5in Aluminum 1-Piece Driveshaft GMCA20-A

2010-2015 Camaro V8 3.5� Aluminum Driveshaft (Stock 6 Speed Manual ONLY)

Available now for the 2010-2015 Camaro is our 3-1/2 aluminum shaft with CV . We have done extensive testing with stock rears and with our 9" kit and believe this to the the most cost-effective trouble-free drive shaft for the Camaro available today. The shaft will come with our signature billet plates for each end so you don't have to go into the rear taking a chance on upsetting the crush collar (see below for billet plate VS changing to a Pinion yoke below). Our shaft comes with a 300m stub system mounted into a billet aluminum plate to ensure not only strength but lighter weight than the normal way of doing this type of end (look closely at the CV end, it's not all steel). The shaft only weighs 28lbs and comes with special grade 12.9 extra strength hardware with back up lock nuts to ensure no loose bolts. We have been using this billet aluminum style plate for over 10 years on thousands of 1000+Hp Supras, BMWs and many more without any bolt issues.

You will have to remove the heat shield from above the center hanger mount to install a 3-1/2" shaft. There is a possibility of clearance issues with aftermarket exhausts. This is a general warning. We have 9 test shafts out and not one had an issue. I have listed this because not all exhaust systems have been tested.

ADDITIONAL INFORMATION

Driveshaft Shop Chevrolet Camaro 2010-2015 V8 6-Speed Manual 3.5in Aluminum 1-Piece Driveshaft GMCA20-A

Description: GMCA20-A 2010-2015 (5th Gen) Camaro SS / Z28 6-Speed Manual 1-Piece 3.5" Alum DS 52.875" TP/FL
Legacy ID: GMCA20-A

FITMENT NOTES

None