Mishimoto 17-19 GM 6.6L L5P Hot-Side Pipe and Boot Kit Polished

Hot-Side Intercooler Pipe and Boot Kit fits 6.6L Duramax L5P '17-'19 Polished

Improve the power and efficiency of your 2017-2019 Chevrolet/GMC 6.6L Duramax L5P with the Mishimoto hot-side intercooler pipe and boot kit. The factory hot-side pipe for the L5P is a measly 2.5in that chokes the engine while the tight bends and built-in resonator create even more restriction. The Mishimoto hot-side intercooler pipe is 3in in diameter throughout and eliminates the factory resonator to significantly increase airflow resulting in more power potential. Mishimoto designed this pipe as two pieces like the factory pipe for ease of install. This kit also includes our silicone boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone DuraCore provides superior resistance to heat pressure fuel and oil. This effectively increases the life of our boots by preventing leaks and blowouts.To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. The Mishimoto 2017-2019 Chevrolet/GMC 6.6L Duramax L5P hot-side intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle-black powder coated finish. Like all our Duramax products this hot-side intercooler pipe and boot kit includes our Mishimoto Lifetime Warranty for a lifetime of performance.

Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
Eliminates stock resonator for improved flow
Up to 55% less restrictive than stock piping
Bung can be drilled and tapped for additional sensors
Requires no additional tuning
Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
Available in polished or wrinkle-black powder coated finish
Mishimoto Lifetime Warranty
Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
Up to 55% less restrictive than stock piping
Includes new quick-disconnect O-ring and spring clip
Hot-side eliminates stock resonator for maximum flow
Eliminates failure-prone stock throttle valve connector
Retains temp sensor harness mount for safe and secure wire routing
Internal bead roll ensures secure connection between coupler and throttle valve
CNC-machined quick-disconnect ensures precise leak-free fit
Additional bungs can be drilled and tapped for sensors
Requires no additional tuning
Eliminates stock resonator for improved flow
Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
Available in polished or wrinkle-black powder coated finish
Up to 55% less restrictive than stock piping
Bung can be drilled and tapped for additional sensors
Requires no additional tuning
Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
Available in polished or wrinkle-black powder coated finish
Mishimoto Lifetime Warranty

ADDITIONAL INFORMATION

Install Difficulty: 3
OptionLabel: Polished
SellingPoint01: Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
SellingPoint02: 3.0-in mandrel-bent aluminum polished pipes eliminate restrictive bends
SellingPoint03: Eliminates stock resonator for improved flow
SellingPoint04: Up to 55-percent less restrictive than stock piping
SellingPoint05: Bung can be drilled and tapped for additional sensors
SellingPoint06: Requires no additional tuning
SellingPoint07: Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
SellingPoint08: Available in polished or wrinkle-black powder coated finish
SellingPoint09: Mishimoto Lifetime Warranty
SellingPoint10: N/A
SellingPoint11: N/A
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2017-2019 Chevrolet Silverado 2500 HD w/ 6.6L Duramax L5P--2017-2019 Chevrolet Silverado 3500 HD w/ 6.6L Duramax L5P----2017-2019 GMC Sierra 2500 HD w/ 6.6L Duramax L5P--2017-2019 GMC Sierra 3500 HD w/ 6.6L Duramax L5P
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: N/A
TechSpec Core Height (in): 6.52
TechSpec Core Length (in): 24
TechSpec Core Thickness (in): N/A
TechSpec Core Type: N/A
TechSpec Engine Codes: N/A
TechSpec Includes: (1) Aluminum Intercooler Pipe w/ Bung--(1) Aluminum Intercooler Pipe--(3) Silicone Boots with DuraCore Technology--(6) Constant-Tension T-Bolt Clamps--Mishimoto Lifetime Warranty
TechSpec Inlet (in): N/A
TechSpec Installation Notes: 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: N/A
TechSpec Outlet (in): N/A
TechSpec Overall Height (in): N/A
TechSpec Overall Length (in): N/A
TechSpec Overall Width (in): N/A
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): N/A

FITMENT NOTES

2017-2019 Chevrolet Silverado 2500 HD
2017-2019 Chevrolet Silverado 3500 HD
2019-2019 Chevrolet Silverado 4500 HD
2019-2019 Chevrolet Silverado 5500 HD
2019-2019 Chevrolet Silverado 6500 HD