BMR 15-17 S550 Mustang Front Hollow 35mm 3-Hole Adj. Sway Bar Kit - Red

BMR Suspension designed the SB044 sway bar kit for street performance, autocross, and road race applications.

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB044 S550 Mustang front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 35mm DOM tubing, the SB044 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 95-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The billet aluminum sway bar mounting brackets minimize deflection. The sway bar is 3-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.

Fits all S550 Mustangs
Designed for street performance, autocross, and road race applications
Dramatically reduces body roll
19%-55% increase in sway bar rate
Cold formed to better resist torsional fatigue
Manufactured from 35mm heavy-wall DOM tubing for increased strength
Three-way adjustable for street and track use
Adjustability allows for fine-tuning of suspension
95-durometer, greasable polyurethane bushings
1/4" Formed sway bar saddles
Durable powdercoat finish
1-2 hour installation time
Proudly designed in the U.S.A.
Proudly made in the U.S.A.

ADDITIONAL INFORMATION

BMR 15-17 S550 Mustang Front Hollow 35mm 3-Hole Adj. Sway Bar Kit - Red

Front Sway Bar Adjustable: 3-position
Front Sway Bar Diameter (in): 1.375 inches
Front Sway Bar Diameter (mm): 35.0 mm
Front Sway Bar Type: Hollow
Mounting Hardware Included: Yes
Position: Front
Quantity: Sold as a kit
Sway Bar Finish: Red powdercoated
Sway Bar Material: Steel
Title: BMR Suspension SB044R Sway Bar Kit, Front, Hollow, 35mm, 3-hole Adjustable

FITMENT NOTES

2015-2020 Ford Mustang